Supported Metrics

The following tabs represent the Metric Category of HPE MSA

Tabbed Interface with Table
Availability
Capacity
Performance
Power
Thermal
Usage
Native TypeMetric NameDisplay NameUnitsApplication VersionDescription
HPE MSA Storage Arrayhpe_msa_storageArray_HealthHPE MSA Storage Array Health1.0.0HPE MSA system health status. Possible values are - OK : 0, Degraded : 1, Fault : 2, Unknown : 3, N/A : 4
HPE MSA Enclosurehpe_msa_enclosure_HealthHPE MSA Enclosure Health1.0.0HPE MSA system enclosure health status. Possible values are - OK : 0, Degraded : 1, Fault : 2, Unknown : 3, N/A : 4
hpe_msa_enclosure_StatusHPE MSA Enclosure Status1.0.0HPE MSA system enclosure status. Possible values are - OK : 0, Degraded : 1, Fault : 2, Unknown : 3, N/A : 4
HPE MSA Diskhpe_msa_disk_StatusHPE MSA Disk Status1.0.0HPE MSA disk drive status. Possible values are - Up : 0, Spun Down : 1, Warning : 2, Error : 3 , Unknown : 4,
Not Present : 5, Unrecoverable : 6, Unavailable : 7, Unsupported : 8
hpe_msa_disk_LedStatusHPE MSA Disk Led Status1.0.0HPE MSA Disk LED status. Possible values are - Online : 0 , Rebuild : 1, Fault : 2 , Pred Fail : 3, ID : 4,
hpe_msa_disk_TemperatureStatusHPE MSA Disk Temperature Status1.0.0The temperature status of the disk. Possible values are - OK : 0, Warning : 1, Critical : 2 , Unknown : 3
hpe_msa_disk_HealthHPE MSA Disk Health1.0.0HPE MSA Disk health status. Possible values are - OK : 0, Degraded : 1, Fault : 2, Unknown : 3, N/A : 4
hpe_msa_disk_PowerOnHoursHPE MSA Disk PowerOnHoursh1.0.0The total number of hours that the disk has been powered on since it was manufactured.
hpe_msa_disk_ssdLifeRemainingHPE MSA Disk SSD Life Remaining%1.0.0The percentage of disk life remaining. Possible values are - 100 % to 0 % (or) NA
HPE MSA Poolhpe_msa_pool_HealthHPE MSA Pool Health1.0.0Hpe MSA pool health. Possible values are - OK : 0, Degraded : 1, Fault : 2, Unknown : 3, N/A : 4
HPE MSA Poolhpe_msa_pool_HealthHPE MSA Pool Health1.0.0Hpe MSA pool health. Possible values are - OK : 0, Degraded : 1, Fault : 2, Unknown : 3, N/A : 4
HPE MSA Disk Grouphpe_msa_diskgroup_StatusHPE MSA Diskgroup Status1.0.0The diskgroup status. Possible values are - CRIT : 0, DMGD : 1, FTDN : 2, FTOL : 3, MSNG : 4,
OFFL : 5 , QTCR : 6, QTDN : 7 , QTOF : 8 , QTUN : 9, STOP : 10, UNKN : 11, UP : 12
hpe_msa_diskgroup_HealthHPE MSA Diskgroup Health1.0.0HPE MSA diskgroup health. Possible values are - OK : 0, Degraded : 1, Fault : 2, Unknown : 3, N/A : 4
HPE MSA Volumehpe_msa_volume_HealthHPE MSA Volume Health1.0.0MSA volume health status. Possible values are - OK : 0, Other : 1
HPE MSA Power Supplyhpe_msa_powersupply_HealthHPE MSA Powersupply Health1.0.0Powersupply health. Possible values are - OK : 0, Degraded : 1, Fault : 2, Unknown : 3, N/A : 4
HPE MSA Controllerhpe_msa_controller_StatusHPE MSA Controller Status1.0.0MSA controller status. Possible values are - Operational : 0, Down : 1, Not Installed :2
hpe_msa_controller_HealthHPE MSA Controller Health1.0.0MSA controller health status. Possible values are - OK : 0, Degraded : 1, Fault : 2, Unknown : 3, N/A : 4
hpe_msa_controller_FailedOverHPE MSA Controller FailedOver1.0.0Failed over to this controller . Possible values are - No : 0, Yes :1
HPE MSA Porthpe_msa_port_StatusHPE MSA Port Status1.0.0MSA controller port status. Possible values are - Up : 0, Warning : 1, Error : 2, Not Present : 3, Disconnected : 4
hpe_msa_port_HealthHPE MSA Port Health1.0.0MSA controller port health. Possible values are - OK : 0, Degraded : 1, Fault : 2, Unknown : 3, N/A : 4
hpe_msa_port_SfpStatusHPE MSA Port SFPStatus1.0.0MSA controller port SFP status. Possible values are - OK : 0 , Not present : 1 , Not compatible : 2 , Incorrect protocol : 3
Native TypeMetric NameDisplay NameUnitsApplication VersionDescription
HPE MSA Diskhpe_msa_disk_SizeHPE MSA Disk SizeTB1.0.0HPE MSA disk capacity.
HPE MSA Poolhpe_msa_pool_TotalSizeHPE MSA Pool TotalSizeTB1.0.0The total capacity of the pool.
hpe_msa_pool_AvailableCapacityHPE MSA Pool AvailableCapacityTB1.0.0The available capacity of the pool.
hpe_msa_pool_CapacityUtilizationHPE MSA Pool Capacity Utilization%1.0.0The percentage utilization of the pool capacity.
hpe_msa_pool_snapSizeHPE MSA Pool SnapSizeKB1.0.0The pool capacity used by snapshots.
hpe_msa_pool_TotalMetadataSizeHPE MSA Pool TotalMetadataSizeGB1.0.0The pool totalmetadatasize.
HPE MSA Disk Grouphpe_msa_diskgroup_SizeHPE MSA Diskgroup SizeTB1.0.0The diskgroup size.
hpe_msa_diskgroup_RawSizeHPE MSA Diskgroup RawSizeTB1.0.0The diskgroup raw size.
hpe_msa_diskgroup_AllocatedPagesHPE MSA Diskgroup AllocatedPagescount1.0.0Number of pages allocated to diskgroup.
hpe_msa_diskgroup_TargetSpareCapacityHPE MSA Diskgroup TargetSpareCapacityGB1.0.0The target spare capacity
hpe_msa_diskgroup_ActualSpareCapacityHPE MSA Diskgroup ActualSpareCapacityGB1.0.0The actual spare capacity
hpe_msa_diskgroup_DegradedCapacityHPE MSA Diskgroup DegradedCapacityGB1.0.0The amount of storage space that is protected against loss of a single disk only
hpe_msa_diskgroup_CriticalCapacityHPE MSA Diskgroup CriticalcapacityGB1.0.0The amount of storage space that is not protected currently against disk loss.
HPE MSA Volumehpe_msa_volume_TotalSizeHPE MSA Volume TotalSizeGB1.0.0MSA volume total size
hpe_msa_volume_AllocatedSizeHPE MSA Volume AllocatedSizeMB1.0.0MSA volume allocated size
Native TypeMetric NameDisplay NameUnitsApplication VersionDescription
HPE MSA Diskhpe_msa_disk_TransferRateHPE MSA Disk Transfer RateGbps1.0.0The data transfer rate.
hpe_msa_disk_TotalIOsHPE MSA Disk Total IOsIOPS1.0.0The total number of reads and writes I/O operations.
hpe_msa_disk_TotalDataTransferredHPE MSA Disk Total Data TransferredMB1.0.0MSA disk total data transferred.
HPE MSA Poolhpe_msa_pool_PagesAllocatedPerMinHPE MSA Pool PagesAllocatedPerMinpmin1.0.0The pool pages allocated per min.
hpe_msa_pool_PagesAllocatedPerHrHPE MSA Pool PagesAllocatedPerHrper hour1.0.0The pool pages allocated per hour.
hpe_msa_pool_PagesDeallocatedPerMinHPE MSA Pool PagesDeallocatedPerMinpmin1.0.0The pool pages deallocated per min.
hpe_msa_pool_PagesDeallocatedPerHrHPE MSA Pool PagesDeallocatedPerhrper hour1.0.0The pool pages deallocated per hour.
hpe_msa_pool_PagesUnmappedPerMinHPE MSA Pool PagesUnmappedPerMinpmin1.0.0The pool pages unmapped per min.
hpe_msa_pool_PagesUnmappedPerHrHPE MSA Pool PagesUnmappedPerHrper hour1.0.0The pool pages unmapped per hour.
hpe_msa_pool_NumberOfPageAllocationsHPE MSA Pool NumberOfPageAllocationscount1.0.0The pool pages allocated count.
hpe_msa_pool_NumberOfPageDeallocationsHPE MSA Pool NumberOfPageDeallocationscount1.0.0The pool pages deallocated count.
hpe_msa_pool_BlockedSSDPromotionsPerMinHPE MSA Pool BlockedSSDPromotionsPerMinpmin1.0.0The pool blocked SSD promotions per min.
hpe_msa_pool_BlockedSSDPromotionsPerHrHPE MSA Pool BlockedSSDPromotionsPerHrper hour1.0.0The pool blocked SSD promotions per hour.
hpe_msa_pool_ReadsHPE MSA Pool Readscount1.0.0The MSA pool reads.
hpe_msa_pool_WritesHPE MSA Pool Writescount1.0.0The MSA pool writes.
hpe_msa_pool_DataReadHPE MSA Pool DataReadGB1.0.0The MSA pool data read.
hpe_msa_pool_DataWrittenHPE MSA Pool DataWrittenGB1.0.0The MSA pool data written.
hpe_msa_pool_BytesPerSecHPE MSA Pool BytesPerSecKBps1.0.0The MSA pool bytes per second.
hpe_msa_pool_iopsHPE MSA Pool IopsIOPS1.0.0The MSA pool IOPS.
hpe_msa_pool_AvgRespTimeHPE MSA Pool AvgRespTimems1.0.0MSA pool Avg IO response time.
hpe_msa_pool_AvgReadRespTimeHPE MSA Pool AvgReadRespTimems1.0.0MSA pool Avg read response time.
hpe_msa_pool_AvgWriteRespTimeHPE MSA Pool AvgWriteRespTimems1.0.0MSA pool Avg write response time.
hpe_msa_tierpool_PagesAllocatedPerMinHPE MSA TierPool PagesAllocatedPerMinpmin1.0.0The tier pool pages allocated per min.
hpe_msa_tierpool_PagesDeallocatedPerMinHPE MSA TierPool PagesDeallocatedPerMinpmin1.0.0The tier pool pages deallocated per min.
hpe_msa_tierpool_PagesUnmappedPerMinHPE MSA TierPool PagesUnmappedPerMinpmin1.0.0The tier pool pages unmapped per min.
hpe_msa_tierpool_ReadsHPE MSA TierPool Readscount1.0.0The MSA tier pool reads.
hpe_msa_tierpool_WritesHPE MSA TierPool Writescount1.0.0The MSA tier pool writes.
hpe_msa_tierpool_DataReadHPE MSA TierPool DataReadGB1.0.0The MSA tier pool data read.
hpe_msa_tierpool_DataWrittenHPE MSA TierPool DataWrittenGB1.0.0The MSA tier pool data written.
hpe_msa_tierpool_BytesPerSecHPE MSA TierPool BytesPerSecKBps1.0.0The MSA tier pool bytes per second.
hpe_msa_tierpool_iopsHPE MSA TierPool IopsIOPS1.0.0The MSA tier pool IOPS.
hpe_msa_tierpool_AvgRespTimeHPE MSA TierPool AvgRespTimems1.0.0MSA tier pool Avg IO response time.
hpe_msa_tierpool_AvgReadRespTimeHPE MSA TierPool AvgReadRespTimems1.0.0MSA tier pool Avg read response time.
hpe_msa_tierpool_AvgWriteRespTimeHPE MSA TierPool AvgWriteRespTimems1.0.0MSA tier pool Avg write response time.
HPE MSA Disk Grouphpe_msa_disgroup_PerformanceRankHPE MSA Diskgroup PerformanceRank1.0.0Diskgroup performance rank.
hpe_msa_diskgroup_CurrentJobCompletionPercentageHPE MSA Diskgroup Current Job Completion Percentage%1.0.0Percent complete of running jobs. Possible values - 0% to 99% ( or) blank if no job is running (job completed).
HPE MSA Controllerhpe_msa_controller_BytesPerSecHPE MSA Controller BytesPerSecKBps1.0.0MSA controller bytes per second.
hpe_msa_controller_iopsHPE MSA Controller IopsIOPS1.0.0MSA controller iops.
hpe_msa_controller_WriteCacheHitsHPE MSA Controller WriteCacheHitscount1.0.0MSA controller write cache hits.
hpe_msa_controller_WriteCacheMissesHPE MSA Controller WriteCacheMissescount1.0.0MSA controller write cache misses.
hpe_msa_controller_ReadCacheHitsHPE MSA Controller ReadCacheHitscount1.0.0MSA controller read-cache hits.
hpe_msa_controller_ReadCacheMissesHPE MSA Controller ReadCacheMissescount1.0.0MSA controller read-cache misses.
hpe_msa_controller_DataReadHPE MSA Controller DataReadGB1.0.0MSA controller data read.
hpe_msa_controller_DataWrittenHPE MSA Controller DataWrittenGB1.0.0MSA controller data written.
hpe_msa_controller_PowerOnTimeHPE MSA Controller PowerOnTimeh1.0.0MSA controller power on time.
hpe_msa_controller_NumberOfReadsHPE MSA Controller NumberOfReadscount1.0.0MSA controller number of reads.
Native TypeMetric NameDisplay NameUnitsApplication VersionDescription
HPE MSA Diskhpe_msa_disk_TemperatureHPE MSA Disk TemperatureCelsius1.0.0The temperature of the disk.
Native TypeMetric NameDisplay NameUnitsApplication VersionDescription
HPE MSA Diskhpe_msa_disk_TemperatureHPE MSA Disk TemperatureCelsius1.0.0The temperature of the disk.
hpe_msa_disk_SpeedHPE MSA Disk Speedrpm1.0.0The speed of the spinning disk.
Native TypeMetric NameDisplay NameUnitsApplication VersionDescription
HPE MSA Poolhpe_msa_pool_AllocatedMetadataSizeHPE MSA Pool AllocatedMetadataSizeGB1.0.0The pool allocated metadata size.
hpe_msa_pool_AvailableMetadataHPE MSA Pool AvailableMetadataGB1.0.0The pool available metadata.
hpe_msa_pool_volumesCountHPE MSA Pool VolumesCountcount1.0.0The pool volumecount.
HPE MSA Disk Grouphpe_msa_diskgroup_FreeSpaceHPE MSA Diskgroup FreeSpaceTB1.0.0The free space in diskgroup.
hpe_msa_diskgroup_OverheadHPE MSA Diskgroup OverheadTB1.0.0The diskgroup overhead.
hpe_msa_diskgroup_TotalPagesHPE MSA Diskgroup TotalPagescount1.0.0Total pages in diskgroup.
hpe_msa_diskgroup_AvailablePagesHPE MSA Diskgroup AvailablePagescount1.0.0Number of pages available for diskgroup
hpe_msa_diskgroup_PoolPercentageHPE MSA Diskgroup PoolPercentage%1.0.0Percentage of pool allocated to diskgroup.
hpe_msa_diskgroup_MetadataSizeHPE MSA Diskgroup MetadataSizeGB1.0.0The amount of metadata the diskgroup is currently using.
HPE MSA Volumehpe_msa_volume_SizeHPE MSA Volume SizeGB1.0.0MSA volume size.
hpe_msa_volume_MetadataInUseHPE MSA Volume MetadatainUseMB1.0.0MSA volume metadata in use.
HPE MSA Controllerhpe_msa_controller_cpuLoadHPE MSA Controller CpuLoad1.0.0MSA controller CPU Load.
hpe_msa_controller_WriteCacheUsedHPE MSA Controller WriteCacheUsedB1.0.0MSA controller write cache used.
HPE MSA Porthpe_msa_port_ActualSpeedHPE MSA Port ActualSpeedGb1.0.0MSA controller port actual link speed.

Default Monitoring Configurations

HPE MSA has default Global Device Management Policies, Global Templates, Global Monitors and Global Metrics in OpsRamp. You can customize these default monitoring configurations as per your business requirement by cloning respective Global Templates and Global Device Management Policies. It is recommended to clone them before installing the application to avoid noise alerts and data.

  1. Default Global Device Management Policies

    You can find the Device Management Policy for each Native Type at Setup > Resources > Device Management Policies. Search with suggested names in global scope:

    {appName nativeType - version}

    Ex: hpe-msa HPE MSA Storage Array - 1(i.e, appName = hpe-msa, nativeType = HPE MSA Storage Array , version = 1)

  2. Default Global Templates

    You can find the Global Templates for each Native Type at Setup > Monitoring > Templates. Search with suggested names in global scope. Each template adheres to the following naming convention:

    {appName nativeType 'Template' - version}

    Ex: hpe-msa HPE MSA Storage Array Template - 1(i.e, appName = hpe-msa, nativeType = HPE MSA Storage Array, version = 1)

  3. Default Global Monitors

    You can find the Global Monitors for each Native Type at Setup > Monitoring > Monitors. Search with suggested names in global scope. Each Monitors adheres to the following naming convention:

    {monitorKey appName nativeType - version}

    Ex: HPE MSA Storage Array Monitor hpe-msa HPE MSA Storage Array 1 (i.e, monitorKey =HPE MSA Storage Array Monitor, appName = hpe-msa, nativeType = HPE MSA Storage Array , version = 1)