Arista-Switch-Performance
Description
HOST-RESOURCES-MIB; 1.3.6.1.2.1.25
Prerequisites
No prerequisite
Supported Metric
| Monitor Name | Metric Name | Metric Display Name | Unit | Description |
|---|---|---|---|---|
| CPU Utilization - HR-MIB | system.cpu.utilization | CPU Utilization | % | The average,over the last minute,of the percentage of time that this processor was not idle.[OIDs: 1.3.6.1.2.1.25.3.3.1.2,1.3.6.1.2.1.25.3.2.1.3]. |
| Physical Memory Utilization - HR-MIB | system.memory.util.percent | Memory Utilization | % | This monitor provides physical and virtual memory utilization using HOST-RESOURCES-MIB.[OID: 1.3.6.1.2.1.25.2.3.1.5,1.3.6.1.2.1.25.2.3.1.6,1.3.6.1.2.1.25.2.3.1.4]. |
| system.memory.free | Memory Free | Bytes | Represents the free system memory.[OID: 1.3.6.1.2.1.25.2.3.1.5,1.3.6.1.2.1.25.2.3.1.6,1.3.6.1.2.1.25.2.3.1.4]. | |
| system.memory.used | Memory Used | Bytes | Represents the amount of memory allocated.[OID: 1.3.6.1.2.1.25.2.3.1.6]. | |
| Virtual Memory Utilization - HR-MIB | system.virtual.memory.util.percent | Memory Utilization | % | This monitor provides physical and virtual memory utilization using HOST-RESOURCES-MIB.[OID: 1.3.6.1.2.1.25.2.3.1.5,1.3.6.1.2.1.25.2.3.1.6,1.3.6.1.2.1.25.2.3.1.4]. |
| system.virtual.memory.free | Memory Free | Bytes | Represents the free system memory.[OID: 1.3.6.1.2.1.25.2.3.1.5,1.3.6.1.2.1.25.2.3.1.6,1.3.6.1.2.1.25.2.3.1.4]. | |
| system.virtual.memory.used | Memory Used | Bytes | Represents the amount of memory allocated.[OID: 1.3.6.1.2.1.25.2.3.1.6]. |
Arista Switch - Hardware
Description
Template to monitor the entity physical sensors (like electric potential ac, electric potential dc, electric current, power, frequency, temperature, percent relative humidity, shaft revolutions per minute and cubic meters per minute (airflow)) values and their operational statuses.[ENTITY-SENSOR-MIB::entPhySensorType-1.3.6.1.2.1.99.1.1.1.1,entPhySensorScale-1.3.6.1.2.1.99.1.1.1.2,entPhySensorPrecision-1.3.6.1.2.1.99.1.1.1.3,entPhySensorValue-1.3.6.1.2.1.99.1.1.1.4,entPhySensorOperStatus-1.3.6.1.2.1.99.1.1.1.5,entPhysicalName-1.3.6.1.2.1.47.1.1.1.1.7]
Note: We have Enhanced the script to use the OID result from [ENTITY-STATE-MIB::entStateOper:1.3.6.1.2.1.131.1.1.1.3 ] for monitoring the operational status". Validated on Arista Networks EOS version 4.27.3.1F running on DCS-7280CR3-32D4, SysObjId=1.3.6.1.4.1.30065.1.3011.7280.2727.3.32.1605.4 and Arista Networks EOS version 4.27.9M running on CCS-720XP-48ZC2SNMP SysObjId=1.3.6.1.4.1.30065.1.2546.720.858.48.207.2.
Prerequisites
Device should support ENTITY-SENSOR-MIB,ENTITY-MIB,ENTITY-STATE-MIB
Supported Metric
| Monitor Name | Metric Name | Metric Display Name | Unit | Description |
|---|---|---|---|---|
| Entity Physical Sensor Reading and Status - Ext - Rev2test | ent.physical.sensor.electric.potential.ac | Electric Potential AC | v | It represents an Entity Electric Potential AC Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] |
| ent.physical.sensor.electric.potential.dc | Electric Potential DC | v | It represents an Entity Electric Potential DC Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.electric.current | Electric Current | amps | It represents an Entity Electric Current Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.power | Power | W | It represents an Entity Power Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.frequency | Frequency | Hz | It represents an Entity Frequency Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.temperature | Temperature | Celsius | It represents an Entity Temperature Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.relative.humidity | Relative Humidity(RH) % | % | It represents an Entity Relative Humidity(RH) Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.rpm | RPM | rpm | It represents an Entity RPM Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.airflow | Airflow (cmm) | It represents an Entity Cubic Meters per minute (airflow) Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | ||
| ent.physical.sensor.operational.status | Operational Status | Monitors the physical sensors (like Fan, Power, Temperature, Voltage etc.) operational status. Possible values for the operational status are: 1- ok: indicates that the agent can obtain the sensor value, 2- unavailable: indicates that the agent presently cannot obtain the sensor value, 3- nonoperational: indicates that the agent believes the sensor is broken. The sensor could have a hard failure (disconnected wire), or a soft failure such as out-of-range, jittery, or wildly fluctuating readings. [ENTITY-SENSOR-MIB::entPhySensorOperStatus-1.3.6.1.2.1.99.1.1.1.5,entPhysicalName-1.3.6.1.2.1.47.1.1.1.1.7] | ||
| Arista Switch - Hardware | ent.physical.sensor.electric.potential.ac | Electric Potential AC | v | It represents an Entity Electric Potential AC Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] |
| ent.physical.sensor.electric.potential.dc | Electric Potential DC | v | It represents an Entity Electric Potential DC Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.electric.current | Electric Current | amps | It represents an Entity Electric Current Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.power | Power | W | It represents an Entity Power Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.frequency | Frequency | Hz | It represents an Entity Frequency Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.temperature | Temperature | Celsius | It represents an Entity Temperature Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.relative.humidity | Relative Humidity(RH) % | % | It represents an Entity Relative Humidity(RH) Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.rpm | RPM | rpm | It represents an Entity RPM Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | |
| ent.physical.sensor.airflow | Airflow (cmm) | It represents an Entity Cubic Meters per minute (airflow) Sensor value. [ENTITY-SENSOR-MIB::OIDs: 1.3.6.1.2.1.47.1.1.1.1.7,1.3.6.1.2.1.99.1.1.1.1,1.3.6.1.2.1.99.1.1.1.2,1.3.6.1.2.1.99.1.1.1.3,1.3.6.1.2.1.99.1.1.1.4] | ||
| entity_physical_sensor_OperationalState | Entity Physical Sensor Operational State | Monitors the Entity Physical Sensor Operational State.Possible values are 1- unknown: resource is unable to report operational state, 2- disabled: resource is totally inoperable, 3- enabled: resource is partially or fully operable, 4- testing: resource is currently being tested and cannot therefore report whether it is operational or not.[ENTITY-STATE-MIB::entStateOper:1.3.6.1.2.1.131.1.1.1.3, ENTITY-SENSOR-MIB::entPhysicalName-1.3.6.1.2.1.47.1.1.1.1.7] |